EPDM · Deck Seal
Dseal SealMaster-H (DeckSeal)
Dseal DeckSeal is Dseal's water-proof, one-piece EPDM seal with integral nosings, bonded into floor and deck joints to take traffic and structural movement.

Click image to zoom
Dseal DeckSeal is a water-proof, one-piece extruded EPDM elastomeric seal with integral nosings, bonded to the substrate with high-strength epoxy adhesive. The ribbed, hollow-cell profile gives a durable, trafficable surface for parking decks, podium slabs, commercial floors and industrial areas.
The solid shoulders are built to take wheeled traffic, and the one-piece design delivers a continuous watertight barrier that accommodates thermal and structural movement, with joint widths up to 100 mm and horizontal movement up to ±50 mm. The EPDM compound resists weathering, ultraviolet exposure and ozone attack, retaining its elasticity and sealing pressure through India's wide temperature swings and heavy monsoon loads.
Key Benefits
- Forms a reliably watertight floor and wall joint that keeps water and dust out
- Flexes continuously with building movement so the seal never cracks or lifts
- EPDM compound resists sun, heat, ozone and monsoon rain for a long service life
- Sits flush with the finished floor for a clean, trip-free walking surface
- Epoxy-bonded one-piece seal built for wheeled deck traffic
- Made in India by Dseal Solutions Private Limited with ISO-certified quality assurance
Applications
- Commercial and office building floor expansion joints
- Industrial and warehouse concrete floors subject to movement
- Multi-storey car park and podium deck slabs
- Wall-to-floor junctions in basements and plant rooms
- Shopping malls, airports and public concourse floors
- Plaza decks and walkway transitions over structural joints
Features & Construction
- One-piece extruded EPDM seal with integral nosings, bonded with high-strength epoxy
- Ribbed, hollow-cell trafficable surface for wheeled loads (1000 kg point load)
- Watertight sealing face that bridges the gap across the full joint length
- Weather, UV and ozone resistant elastomeric compound retains elasticity
- Continuous extruded lengths for unbroken sealing with minimal joins
- Compatible with concrete, masonry and screeded floor substrates
Technical Specifications
| Type | One-piece extruded EPDM seal with integral nosings (DeckSeal) |
|---|---|
| Material | EPDM rubber |
| Application | Floor / deck joints, parking decks, podium slabs |
| Fixing | Bonded to the substrate with high-strength epoxy adhesive |
| Joint width | Up to 100 mm |
| Horizontal movement | Up to ±50 mm |
| Vertical movement | Up to ±15 mm |
| Lateral movement | Up to ±15 mm |
| Load capability | 1000 kg point load |
Size & Movement Details (mm)
| Joint width | 50 | 75 | 100 |
|---|---|---|---|
| Overall profile width | 228 | 254 | 279 |
| Exposed surface | 228 | 254 | 279 |
| Joint height | 19 | 19 | 19 |
| Min. recess depth | 19 | 19 | 19 |
| Min. recess width | 228 | 254 | 278 |
| Horizontal | ±25 | ±38 | ±50 |
| Vertical | ±10 | ±12 | ±15 |
| Lateral | ±5 | ±7 | ±15 |
Installation Guide
- Clean the joint, removing debris, laitance and loose material from both faces
- Measure the joint gap and confirm the correct DeckSeal profile size
- Prime or prepare the joint arrises as recommended for the substrate
- Apply high-strength epoxy adhesive to the recess faces as per the adhesive data sheet
- Seat the one-piece EPDM seal along the joint, pressing the integral nosings into the epoxy
- Check the seal sits flush with no gaps or twists along its length
- Wipe off surplus epoxy, let it cure fully, then inspect the joint for continuity before opening to traffic
Maintenance & Care
DeckSeal needs very little upkeep. Periodically clear grit, debris and standing dirt from the joint surface and rinse with water so the seal stays clean and continues to sit flush. Inspect the joint once or twice a year, paying attention to high-traffic and water-prone areas.
During inspection look for any sections where the EPDM has lifted, shifted or lost compression, and check that the sealing face remains unbroken. The EPDM compound does not require painting or sealing; if a length is ever damaged it can be cut out and re-fitted. Contact Dseal Solutions Private Limited for matching replacement profiles.
FAQs
DeckSeal — Frequently Asked Questions
What is DeckSeal?
Dseal DeckSeal is a water-proof, one-piece extruded EPDM seal with integral nosings, bonded to the slab edges with high-strength epoxy. It bridges floor and deck expansion joints with a continuous, watertight, movement-accommodating barrier.
What material is DeckSeal made from?
It is made from solid EPDM rubber, an elastomer prized for its resistance to weather, UV, ozone and water. Dseal manufactures the profile in India to maintain consistent quality and elasticity.
Which expansion joint type does DeckSeal suit?
It is built for horizontal movement joints, primarily floor-to-floor and wall expansion joints in concrete and masonry construction where a flush, durable seal is required.
Is DeckSeal waterproof?
Yes. When correctly compressed into the joint, DeckSeal forms a watertight seal that prevents water ingress through floor and wall joints, which makes it suitable for decks and wet areas.
How much movement can DeckSeal accommodate?
It accommodates up to ±50 mm horizontal movement on the 100 mm size, with up to ±15 mm vertical and lateral movement. Smaller sizes (50 and 75 mm) have proportionally lower movement; see the size table above.
Is DeckSeal weather and UV resistant?
Yes. The EPDM compound resists ultraviolet light, ozone and weathering, so the seal retains its elasticity and sealing pressure through India's hot summers and heavy monsoons.
How is DeckSeal installed?
The recess is cleaned and dried, epoxy adhesive is applied, and the one-piece EPDM seal is seated along the joint to sit flush with the floor. The epoxy must cure before the joint is opened to traffic.
Does DeckSeal need maintenance?
Very little. Keep the joint clear of grit and debris and inspect it once or twice a year. The EPDM needs no painting or sealing, and damaged lengths can simply be cut out and replaced.
What standards and certifications back DeckSeal?
It is made by Dseal Solutions Private Limited, a manufacturer certified to ISO 9001:2015 for quality, ISO 14001:2015 for environment and ISO 45001:2018 for occupational health and safety.
How is DeckSeal different from SealMaster-HV?
DeckSeal is focused on horizontal floor and wall joints, while SealMaster-HV is rated for both horizontal and vertical joints and gaps up to 120 mm with broader chemical and oil resistance.
Can DeckSeal be made in custom sizes?
Yes. Dseal manufactures profiles to suit different joint widths and can advise on the right size for your project. Contact Dseal Solutions Private Limited to discuss custom requirements.
Can DeckSeal be used outdoors?
Yes. Its weather, UV and ozone resistance makes it well suited to exposed external floors, decks and plazas as well as protected internal joints.
Who manufactures DeckSeal?
DeckSeal is manufactured in India by Dseal Solutions Private Limited under the Dseal brand, a leading maker of expansion joint systems and covers.
Where can I buy DeckSeal in India?
You can buy DeckSeal directly from Dseal (Dseal Solutions Private Limited). Call +91 93109 97953 to discuss your project, get sizing advice and place an order.
Does DeckSeal sit flush with the floor?
Yes. It is designed to seat flush with the finished floor level, leaving a clean, trip-free surface that suits walkways and trafficked areas.
What substrates does DeckSeal work with?
It suits concrete, masonry and screeded floor joints. Dseal can advise on the right preparation and priming for your specific substrate.
Explore More
Related Products

SealMaster-HV
EPDM compression seal for both horizontal and vertical joints — unaffected by water, oil or chemicals, for gaps up to 120 mm.
View Product →
DuraEdge Seal
EPDM wall seal (JD series) focused on durability and edge protection for wall-to-wall movement joints.
View Product →
EnduroSeal
Wall-to-wall EPDM compression seal with collar — quick-fit flexible rubber strips, perfect for refurbishments.
View Product →
TrafficFlex Seal
Floor-to-floor EPDM seal engineered for traffic-heavy horizontal expansion joints.
View Product →
Vertical Compression Seal
D-type EPDM compression seal designed specifically for vertical movement joints in walls and facades.
View Product →
HorizonGuard
Seismic horizontal joint system using a sealant-and-backer-rod arrangement to absorb floor-to-floor movement.
View Product →Outside India? Export enquiries are welcome from Nepal, the UAE, Bhutan, Bangladesh, Sri Lanka and nearby countries. Send your drawing or joint details through the quote request or WhatsApp +91 93109 97953; shipping and terms are agreed with the quote.
BUILDING EXPANSION JOINTS